Cooper Security 9751 Instalační manuál stáhnout pdf (Strana 95)

4. Programming

496964 Page 87

76: Level/Partition D Exit Mode

This Command sets the Exit Mode for Level or Partition D.

In a single system, the options are:

Option

0 The keypad sounders and any internal sounders give a low tone

during exit of Level D. Use Command 79 to select the exit time.

1 Instant Set (no exit tone)

2 Silent Set. Use Command 79 to program the Exit time. At the end of

the exit time the keypad gives a double "beep" confirmation tone.

3 Makes the Level D exit mode the same as Level A.

In a partitioned system, the options are:

Option

0 Timed. Use this option if Partition D sets after an exit time selected

using Command 79. If an Exit Terminate button is fitted, the user may

use it to shorten the exit time.

1 Terminate. Use this option if the user completes setting the partition

by pushing an Exit Terminate button connected to a keypad. The exit

time is infinite in this option.

2 Final Door Set. Use this option to complete setting the partition by

closing a door fitted with a Final Exit zone detector. The exit time is

infinite in this option.

3 Instant Set (no exit tone)

4 Silent Set. Use Command 79 to program the Exit time. At the end of

the exit time the keypad gives a double "beep" confirmation tone.

5 Lock Set. See "Level A Exit Mode (Command 39) for an explanation

of Lock Set.

Note: The keypads give a double "beep" confirmation tone at the end of all

setting modes.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 147 148

Žádné komentáře

Cooper Security 9751 Instalační manuál Strana 95