Cooper Security 9751 Instalační manuál Strana 52

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 148
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 51
3. Installation
Page 44 496964
Fitting a Battery
Fit a rechargeable battery into the back of the case. In the 9751, there is
space in the case for a 12V 7Ah battery; make sure the battery terminals are
oriented in the position shown in Figure 34. In the 9752 and 9851, there is
space in the case for a 17Ah battery; if you prefer to use this, order the kit with
part number 8136EUR-02.
7AH
Figure 34. Fitting a battery (9751)
Initial Start Up
Before applying power to the control unit, ensure that:
All keypads and expanders have been addressed and connected.
All external and internal sounders are connected.
All wired zone circuits are connected.
Then:
1. Connect the battery to the control unit PCB.
2. Briefly short the Kick Start pins together (they are located above battery
connector, see Figure 5).
The green power LED on the keypad flashes and the internal sounder
may sound. Ignore any display at this stage.
3. Key in the factory default User access code: 1234.
The internal sounder stops. Ignore any display at this stage.
Zobrazit stránku 51
1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 147 148

Komentáře k této Příručce

Žádné komentáře