Cooper Security 9751 Instalační manuál Strana 93

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 148
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 92
4. Programming
496964 Page 85
71: Level C Entry Route Operation
In a single system, this Command specifies how the system treats Entry
Route zones during part set C. If you select option 0, any Entry Route zones
included in Level C continue to act as Entry Routes during part set C. If you
select option 1, these zones act as Final Exit zones during part set C.
Note: This Command is not available in a partitioned system.
72: Level/Partition C Exit Mode
This Command sets the Exit Mode for Level or Partition C.
In a single system, the options are:
Option
0 The keypad sounders and any internal sounders give a low tone
during exit of Level C. Use Command 75 to select the exit time.
1 Instant Set (no exit tone)
2 Silent Set. Use Command 75 to program the Exit time. At the end of
the exit time the keypad gives a double "beep" confirmation tone.
3 Makes the Level C exit mode the same as Level A.
In a partitioned system, the options are:
Option
0 Timed. Use this option if Partition C sets after an exit time selected
using Command 75. If an Exit Terminate button is fitted, the user may
use it to shorten the exit time.
1 Terminate. Use this option if the user completes setting the partition
by pushing an Exit Terminate button connected to a keypad. The exit
time is infinite in this option.
2 Final Door Set. Use this option to complete setting the partition by
closing a door fitted with a Final Exit zone detector. The exit time is
infinite in this option.
3 Instant Set (no exit tone)
4 Silent Set. Use Command 75 to program the Exit time. At the end of
the exit time the keypad gives a double "beep" confirmation tone.
5 Lock Set. See "Level A Exit Mode (Command 39) for an explanation
of Lock Set.
Note: The keypads give a double "beep" confirmation tone at the end of all
setting modes.
Zobrazit stránku 92
1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 147 148

Komentáře k této Příručce

Žádné komentáře