Cooper Security M2000 Uživatelská příručka stáhnout pdf (Strana 93)

Engineering Manual Engineer Menu 1-9

05 – On-Line (Keypad) Enabled / On-Line (Keypad) Disabled

On-Line Enabled – When using Downloader software, the On-Line Keypad feature in the

Downloader software is enabled.

On-Line Disabled – When using Downloader software, the On-Line Keypad feature is

disabled.

06 – Unset Ward First / Set Ward First

Unset Ward First – When the system is part set and a user code is entered, the “0=Uset

Wards” option is displayed first.

Set Ward First – When the system is part set and a user code is entered, the “0=Set

Selection” option is displayed first.

07 – Digi Normal / Digi Inverted

Digi Normal – The digital communicator outputs on the control panel switch from +12V to

0V when active (+ve removed).

Digi Inverted – The digital communicator outputs on the control panel switch from 0V to

+12V when active (+ve applied).

08 – Chime Audible / Chime Visible

Chime Audible – Zones that have a Chime Tone attribute (page 29) will only generate a

chime tone.

Chime Visible – Zones that have a Chime Tone attribute will generate a chime tone and

the keypads will display the zone that was triggered.

09 – Manual Omits / Automatic Omits

Manual Omits – Zones that have the Omittable attribute (page 28) can be omitted only

from User option 1-2 (see the

Manager's Manual

Automatic Omits – Zones with the Omittable attribute are automatically omitted if they

are active when the system is being set. This option is not relevant if the View Exit Errors

option is selected (page 87).

)

Do not use Automatic Omits if any ward is using a Deferred Set or Lock Set (page

77), otherwise the system will not set.

10 – Omit Tampers No / Omit Tampers Yes

Omit Tampers No – Omitting a zone using User option 1-2 (see the

Manager's Manual

)

will not also omit tamper faults from that zone.

Omit Tampers Yes – Omitting a zone using User option 1-2 also omits tamper faults from

that zone.

11 – Global Setting / Local Setting

Global Setting – Allows users to set a ward from any keypad, providing their user type

allows this and the ward has been allocated to the user (as specified in User option 2-4;

see the

Manager's Manual

). Also allows any telecommand to set a ward, providing the

ward has been allocated to the telecommand (see option 2-9).

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 179 180

Komentáře k této Příručce

Žádné komentáře

Cooper Security M2000 Uživatelská příručka Strana 93

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Cooper Security M2000