Cooper Security Homelink 75 Uživatelská příručka stáhnout pdf (Strana 78)

Programming Reference - Testing 7510r

Page 74

control unit’s microphone. If necessary you can change

the volume of sound from the loudspeaker by selecting

Social Care Alarms, Set Volume

(see also “Controls and

Connectors” Figure 4 item 9 on page 4 and “Remote

Loudspeaker/Microphone on page 12).

Testing

If you think that part of the system is not working

correctly then you can use the Test option to test various

peripherals.

The Test option also lets you check the identity of

Telecommands, Pendants and Tags.

To start testing, make sure the system is idle then:

1. Enter the User Menu and select Test.

The display shows the Test menu.

2. Select the part of the system that you wish to test.

You can test each part listed in the Test menu as follows:

Siren

Press On/Off to turn the siren on and off again. The

display shows the word "On" when the siren operates.

Loudspeaker

Press On/Off to play a test message from the

loudspeaker. The display shows the word "Playing" when

you should be hearing the message.

Keypad

Press each key once. The display shows a character in

response. Press both dual keys together to test. Press OK

to end the test.

Walk test

The display shows a list of all the detectors installed on

the system. Walk round and trigger each detector. Every

time you trigger a detector the control unit gives a double

tone. The display shows an “A” if you trigger the Alarm

input and a “T” if you trigger the Tamper.

The top of the display shows the number of zones left to

test (both Alarm and Tamper).

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 84

Žádné komentáře

Cooper Security Homelink 75 Uživatelská příručka Strana 78