Cooper Security M2000 Uživatelská příručka stáhnout pdf (Strana 12)

10

Option 1-5: Enabling Chimes

This option enables you to select which of

your wards (if any) use the chime feature. In

a ward with this feature enabled, zones that

have a Chime Tone attribute (User option 2-

5) and are in a selected ward will generate a

chime tone when activated. The wards then

remain chime-enabled until you deselect

them with this option.

A zone may generate one or more chime

tones, depending on the Chime Tone

attribute selected in User option 2-5:

Chime tone 1 single chime

Chime tone 2 double chime

Chime tone 3 triple chime

The chime occurs only at keypads and

extension loudspeakers assigned to the

same ward(s) as the zone.

When a chime occurs, keypads display the

zone number if configured by the Chime

Visible setting in Engineer option 1-9-1-08.

User 1 Menu 5

Enable Chime

1. Press [ to select this option.

Chime on wards:

Ward > 1*......

2. Use the numeric keys to select the wards

you want to have chime enabled, then

press [. Any ward numbers shown will

be chime enabled. (A “*” indicates that

the ward will not be chime enabled. A “.”

Indicates that either you have no access

to the ward, or the ward is not

programmed.)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 75 76

Komentáře k této Příručce

Žádné komentáře