Cooper Security M2000 Uživatelská příručka stáhnout pdf (Strana 10)

8

Option 1-3: Shunting 24hr Zones

This option enables you to shunt (disable) all

24 Hour zones in a selected ward that has

been set up as shuntable in Engineer option

1-1. Shunting disables a zone and the

shuntable attribute identifies whether this is

permissible.

Z

Zones remain shunted until you use the

Reinstate 24hr option (see below).

Z

Reinstating zones may start the exit timer

if the installer has selected Unshunt & Exit

(Engineer option 1-9-1).

User 1 Menu 3

Shunt 24hr Zones

1. Press [ to select this option.

1=Shunt 24Hr

2=Reinstate 24hr

2. Press 1 to shunt zones or 2 to reinstate

zones that have been previously

shunted.

Shunt Wards

Ward > 1*......

3. Use the numeric keys to select the wards

to shunt/reinstate, then press [. Any

ward numbers shown will be

shunted/reinstated. (A “*” indicates that

the ward will not be shunted/reinstated. A

“.” Indicates that either you have no

access to the ward, or the ward has not

been programmed.)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 75 76

Komentáře k této Příručce

Žádné komentáře