Cooper Security i-on 16 Uživatelská příručka stáhnout pdf (Strana 15)

Alarms

Page 13

Silencing an Alarm

In an alarm the i-on16 operates the siren. The siren runs for a

limited time set by the installer (a maximum 15 minutes for

intruder and PA alarms).

If you return to the control unit after the siren has stopped and

key in your access code then the red LEDs around the navigation

keys glow to tell you that an alarm has occurred. Press > to see

information about the alarm. (Press u or n to see the name of

the zone.) Press Y to restore the display to normal.

If you return to the system while the siren is running you can

silence the siren as follows:

1. Key in your access code.

The siren stops and the screen

shows the first zone to cause

the alarm, for example:

(Press u or n to see the

name of the zone.)

2. Press y.

The display returns to normal.

Press tick to reset

Burg Z03 Alarm

If you wish to see any other zones that were triggered during the

alarm, look in the log (see page 24).

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Žádné komentáře

Cooper Security i-on 16 Uživatelská příručka Strana 15