Cooper Security M-Series Manuál s instrukcemi stáhnout pdf (Strana 12)

6 496478

1. Introduction

User Control

The control unit provides eight independent user access codes and a sepa-

rate Duress code. The user can change these codes at any time, but cannot

program the system with these codes.

The user can set the system in the following modes:

Full Set All the zones function as programmed during installation.

Part Set B Selected zones are omitted. You must program the zones

to be omitted during installation.

Set with Omit One or more zones temporarily omitted. The user selects

the zones to be omitted during setting.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 70 71

INSTALLATION AND 1
PROGRAMMING GUIDE 1
Contents 3
496478 iii 5
1. INTRODUCTION 7
Figure 1. 9750 System Layout 8
496478 3 9
4 496478 10
System Features 11
Detectors 11
9755 Hardwired Expander 11
9955 Radio Expander 11
User Control 12
2. Technical Description 13
Control Unit PCB and Case 14
9755 Expander 15
Compatible Equipment 16
3. INSTALLATION 17
Fitting a 9930 LCD Keypad 18
496478 13 19
Wiring the Control Unit 20
Cable Entries 20
Mains Connection 20
Remote Keypads 21
Connecting Keypads 22
Exit Terminate Button 22
Sounders 22
Detector Circuit Connections 23
Connecting a 9755 Expander 23
Using Programmable Outputs 24
Wiring Keyswitches 25
Installing a Communicator 26
Statutory Information 27
Application 27
Compatible PABXs 27
Approval 27
Safety Notice 28
Connecting the Telephone Line 29
24 496478 30
496478 25 31
Fitting a Battery 32
Initial Start Up 33
28 496478 34
4. Programming 35
30 496478 36
496478 31 37
32 496478 38
* See “5. Testing” 39
Communications Programming 40
496478 35 41
Leaving Programming Mode 42
Engineer Reset 42
Re-entering Programming Mode 42
Programming Reference 43
38 496478 44
496478 39 45
RedCare Reset (Command 23) 46
Status Display (Command 28) 47
System Reset (Command 33) 47
PA Reset (Command 34) 48
Alarm Abort (Command 36) 48
496478 43 49
CSID Code (Command 50) 50
496478 45 51
46 496478 52
496478 47 53
Call Mode (Command 101) 54
Reporting Type (Command 103) 55
Dynamic Test (Command 108) 56
Download Mode (Command 110) 57
Rings to Answer (Command 112) 57
52 496478 58
496478 53 59
Report Mode (Command 131) 60
496478 55 61
56 496478 62
5. Testing 63
58 496478 64
496478 59 65
60 496478 66
64 496478 70

Komentáře k této Příručce

Žádné komentáře

Cooper Security M-Series Manuál s instrukcemi Strana 12

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Cooper Security M-Series