Cooper Security i-on160EX Uživatelský manuál stáhnout pdf (Strana 73)

i-on40 & i-onEX Range 4. Administration

Page 67

Note that you cannot test wired HUA wired buttons, Fire

detectors, and 24 hour zones during a walk test. The control unit

will always start an alarm if you activate those detectors. (A 24-

hour zone has detectors that are “live” all the time, not just when

you set the system.)

If you find a detector that does not work, call your installer.

To use the Walk Test menu:

1. Make sure the display shows

the standby screen.





2. Press .





3. Key in your access code (or

present a tag).





4. Press  until you see:.





5. Press .

The bottom line of the display

shows:





6. Press  until you see:





7. Press .

The bottom line of the display

shows:





8. Press  or  to turn a chime

tone on or off.

When the chime tone is on, the

keypads and loudspeakers will

sound a chime tone for each

zone that triggers while you

are performing the walk test.

9. Press . to see the first of the

walk test options:





The Walk Test menu provides three options to give different ways

of organising a walk test. The options within Walk Test are:

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 121 122

Komentáře k této Příručce

Žádné komentáře

Cooper Security i-on160EX Uživatelský manuál Strana 73

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Cooper Security i-on160EX