Cooper Security i-on160EX Instalační příručka stáhnout pdf (Strana 157)

i-on160 Step by Step Programming Procedures

Page 151

display, for example:

6. Press X when you have finished.

INSTALLER MENU

About >

Seeing Which Communications Module Is Currently Installed:

1. Enter Installer Menu.

INSTALLER MENU

Detectors/Devices >

2. Press u until the display shows:

INSTALLER MENU

About >

3. Press Y.

ABOUT

Panel >

4. Press n. until the display shows:

ABOUT

Comms >

5. Press Y.

The bottom line of the display shows the

module type currently fitted (or the word

“None” if no module is fitted).

ABOUT COMMS

Module: 8750 >

If the communications module is an Ethernet or

GPRS module:

6. Press Y.

The bottom line of the display shows “IP

Address”.

MODULE: ETHERNET

IP Address >

7. Press Y.

The bottom line of the display shows the IP

address currently assigned to the plug-on

Ethernet module. Note that this may have been

assigned by DHCP.

IP ADDRESS

000.000.000.000.DHCP

8. Press X then n.

MODULE: ETHERNET

Subnet Mask >

9. Press Y.

The bottom line of the display shows the subnet

mask currently assigned to the plug-on

Ethernet module. Note that this may have been

assigned by DHCP.

SUBNET MASK

000.000.000.000 DHCP

10. Press X then n.

MODULE: ETHERNET

Gateway Address >

11. Press Y.

The bottom line of the display shows the

gateway address currently assigned to the

plug-on Ethernet module. Note that this may

have been assigned by DHCP, or this may be

GATEWAY ADDRESS

000.000.000.000 DHCP

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 179 180

Komentáře k této Příručce

Žádné komentáře

Cooper Security i-on160EX Instalační příručka Strana 157

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Cooper Security i-on160EX